13
Pix Curve -
the menu allows to set a dimmer running for all pixel modules.
As Global
- dimmer curve is taken from a global dimmer curve set in
the menu item "Linear/Exponential" (menu Configuration).
Separate
- allows to set a dimmer curve independently on
the global dimmer curve (menu "Linear/Exponential").
0-10V Zone Setting
--- The menu item serves for LED zones only, not for pixel zones.
Fan Zone Setting
--- Use the menu item to set the Fan Zone (if the Fan Zone is installed).
Type of Sensor 1
- allows you to select desired type of a temperature sensor (PT500/PT1000/
NTC) for temp. sensor input 1.
Type of Sensor 2
- allows you to select desired type of a temperature sensor (PT500/PT1000/
NTC) for temp. sensor input 2.
Note: as NTC sensor use the NTC thermistor NTC10K-AWG26, 500mm (P/N 13052203)
Fan 1 Voltage
- allows you to set desired voltage (12V/24V/48V-ArcPower RackUnit
Pixel CE/US,12V/24V for ArcPower RackUnit Pixel US (LV)) for supply of a fan connected to
the fan output 1.
Fan 2 Voltage
- allows you to set desired voltage (12V/24V/48V-ArcPower RackUnit
Pixel CE/US, 12V/24V for ArcPower RackUnit US (LV)) for supply of a fan connected to
the fan output 2. Note: max. current consumption of 1 A for fan must not be exceeded.
Fan 1 Config
- allows you to select a way of control of the fan 1:
Min. Pwr
- the fan 1 runs at 50% of its set voltage (item "Fan 1 Voltage").
E.g. if the item Fan 1 Voltage is set at 24V, the fan 1 will run at 12V.
Max.
Pwr
- the fan 1 runs at 100% of its set voltage (item "Fan 1 Voltage").
E.g. if the item Fan 1 Voltage is set at 24V, the fan 1 will run at 24V.
By Sens 1
- the fan 1 runs according to the value set in the menu "Fan 1
Threshold"
By Sens 2
- the fan 1 runs according to the value set in the menu "Fan 2
Threshold".
Fan 2 Config
- allows you to select a way of control of the fan 2:
Min. Pwr
- the fan 2 runs at 50% of its set voltage (item "Fan 2 Voltage").
E.g. if the item Fan 2 Voltage is set at 24V, the fan 2 will run at 12V.
Max.
Pwr
- the fan 2 runs at 100% of its set voltage (item "Fan 2 Voltage").
E.g. if the item Fan 2 Voltage is set at 12V, the fan 2 will run at 12V.
By Sens 1
- the fan 2 runs according to the value set in the menu "Fan 1
Threshold"
By Sens 2
- the fan 2 runs according to the value set in the menu "Fan 2
Threshold".
Note: Both fans can be controlled by one temperature sensor.
Fan 1 Threshold
- allows you to set a temperature (10°-60°) which will be used for
a control of the fan 1 speed.
Fan 2 Threshold
- allows you to set a temperature (10°-60°) which will be used for
a control of the fan 2 speed.
Relationship between a temperature set in the Fan 1 Threshold (Fan 2 Threshold) menu
describes the graph below.
Summary of Contents for ArcPower Rack Unit Pixel CE: ArcPower Rack Unit Pixel US
Page 1: ...version 1 7...
