18
7.4 Manual mode
This menu serves for LED Zones only (not for PIXEL Zones).
7.5 Stand-alone setting
Only two items serve for control of the PIXEL Zones:
All Chan. Together
--- the menu item allows to saturate all channels of connected pixel modules on desired
level - all pixel modules will light . This function is useful for fast check of functionality of connected pixel modules.
All by channels
--- the menu item allows to saturate red, green, blue and white channels on all Pixel zones.
7.6 Special Functions
Diagnostic
--- The menu item runs diagnostic of the ArcPower Rack Unit Pixel. There is a list of error (or
warning) messages.
Note: message in red - error, message in yellow - warning
Overload
- The ArcPower Rack Unit Pixel is overloaded. Disconnect some LED modules
or reduce LED current.
To many zones or not identified
- probably some zone is faulty.
LED termistors
- Some LED module with a temperature sensor hase been
disconnected from the LED zone since last operation of ArcPower Rack Unit Pixel.
Corresponding LED zone works, but its output power is reduced to 20% (from a safety reason).
Communication with A.Z. Pixel
- Some Pixe zone does not communicate with
an ArcPower Rack Unit Pixel (the Pixel zone is probably faulty). Try to switch off/on
the ArcPower Rack Unit Pixel.
If the error appears again, switch ArcPower Rack Unit Pixel off and disconnect the
Pixel zones from the ArcPower Rack Unit Pixel to make sure, that problem is in some
Pixel zone.
The following error messages refer to the Fan Zone only. In all cases stated below the corresponding fan
does not run.
Fan 1:1
- Fan 1 has been set to 48V (menu Fan 1 Voltage), but the 48V power supply
is not available in the Arc Power Rack Unit Pixel US (LV).
Fan 2:1
- Fan 2 has been set to 48V (menu Fan 2 Voltage), but the 48V power supply
is not available in the Arc Power Rack Unit Pixel US (LV).
Fan 1:2
- PCB of the fan 1 in the Fan Zone is overheated.
Fan 2:2
- PCB of the fan 2 in the Fan Zone is overheated.
Fan 1:4
- Type of a temperature sensor is not set in the menu Type of Sensor 1.
Fan 2:4
- Type of a temperature sensor is not set in the menu Type of Sensor 2.
Fan 1:8
- Short circuit on output terminals for fan 1.
Fan 2:8
- Short circuit on output terminals for fan 2.
Summary of Contents for ArcPower Rack Unit Pixel CE: ArcPower Rack Unit Pixel US
Page 1: ...version 1 7...
