20
7. If the connection is OK, click the “Start Uploading" button to start software uploading. It will take several
minutes to perform software update.
If the option "Incremental Update" is not checked, all processors will be updated (including processors with
the same software version).
If you wish to update only processors with not topical versions of software, check the “Incremental Update
box“.
Avoid interrupting the process. Update status is being displayed in the "Info Box" window.
When the update is finished, the line with the text “Fixture is successfully updated“ will appear in
this window.
In case upload process is interrupted (e.g. power loss), the fixture stays in “Updating mode” and you will have
to repeat the software update again.
Another way, how to update software in the fixtures (especially large installation of fixtures) is to use the ROBE
Uploader. It is a software for automatized software update of Anolis fixtures. It can take advantage of Ethernet
ports and RDM support if present in the units.
For more information please see https://www.robe.cz/support/.
Reset
device
- use the menu item to reset the ArcPower Rack Unit Pixel.
Load test
--- Use this menu item to run test whether the ArcPower Rack Unit Pixel is able to supply all
connected LED modules.
Summary of Contents for ArcPower Rack Unit Pixel CE: ArcPower Rack Unit Pixel US
Page 1: ...version 1 7...
