Anolis ArcPower 144, User Manual

Page: 5 / 20

4 5
DMX Input, Output LED module Input
Pin 1:
Not connected
Pin 1:
Red LED +
Pin 2:
Not connected
Pin 2:
Green LED +
Pin 3:
Not connected
Pin 3:
Blue LED +
Pin 4:
Not connected
Pin 4:
White LED +
Pin 5:
+5V
Pin 5:
Red LED -
Pin 6:
Data +
Pin 6:
Green LED -
Pin 7:
Data -
Pin 7:
Blue LED -
Pin 8:
GND
Pin 8:
White LED -
4. Installation
4.1 Connection to the mains:
CE version:
This version of ArcPower 144 is equipped with auto-switching power supply that automatically adjusts to any
50/60Hz AC power source from 100-240 Volts.
Carefully prepare the end of the the supply cord and fit a suitable plug.A 3-prong grounding-type plug must be
installed following the manufacturer´s instructions.The earth has to be connected!
Cord plug connections:
Cable Pin International
Brown Live L
Light blue Neutral N
Yellow/Green Earth
ETL version:
This version of ArcPower 144 is equipped with auto-switching power supply that automatically adjusts to any
50/60Hz AC power source from 100-120 Volts.
Connect the ArcPower 144 directly to AC power with the supply cord.
3 - Control Board
4 - Power Indicator
5 - DMX Output
6 - DMX Input
7 - LED Zone Outputs
8 - RS 232 Input
RS232 Input
Canon 9-pin male
Pin 1:
Not connected
Pin 2:
Received Data
Pin 3:
Transmitted Data
Pin 4:
Pin 5:
Signal Ground
Pin 6:
Pin 7:
Pin 8:
Pin 9:
Not connected
Front view of the socket:
RJ45 socket
RJ45 socket