AWG08-001
Environmental Qualification Form
Rev: 1.00
Nov 2, 2018
Page 5 of 5
ENG-FORM: 521-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
REMARKS
1.
Sections 4 to 8,15 to 19, and 25 tests were conducted at Anodyne Electronics
Manufacturing Corp (AEM) in Kelowna, BC.
2.
Sections 20, 21 and 22 were tested at CKC Laboratories in Bothell, WA.
3.
In Section 20 the equipment was tested with conducted RF Susceptibility levels and
frequencies to satisfy the requirements of both DO-160G Sec 20.4 and DO-214A,
Sec 2.5.11. The AWG08-001 is not intended for installations with exposure to
T-PEDs. The AWG08-001 is intended for installation in a shielded enclosure (such
as shielded avionics bay) as per the recommendations of RTCA/DO-214A section
2.5.11.
End of Environmental Qualification Form
