Step 4. Configure your Anker device
Step 5. Connect you router with Anker Device and Connect to the Wireless Web
Congratulations! You should now be able to surf the Internet with a strong Wi-Fi
signal from your newly configured 4-in-1 Anker Compact Wi-Fi Repeater.
Logon to the device's configuration page
Open a web browser on your computer, and type 192.168.100.253 to reach the
device's configuration page. When the log-on dialogue is displayed, enter your
default UserName /Password: admin/admin to logon to the Anker device's
configuration web page.
Configure the device
The manufacturer default setting is Bridge Mode. Customize the
SSID
, set
Security Options
and your desired
PassPhrase
.
Click
Finish
to apply the settings. Wait 2 minutes to allow a full restart.
Note:
If you previously set the Anker device to AP-router mode, then you need to
click
Mode settings
and choose
Bridge Mode
. Then the Anker device will
restart. Please wait 2 minutes, reconnect to the wireless network, and then logon
to the configuration page again.
4.1
4.2
Connect you router and Anker Device with a network cable, wait 30 seconds to
allow it restart again.
On your computer, view the list of available wireless networks (typically
accessible via a Wi-Fi icon located at the corner of your computer's desktop).
Select the newly named network. If the desired network does not appear, please
wait and refresh until the network becomes available.
Connect to your desired network, and input your password when prompted.
5.1
5.2
5.3
7
