7. How do I return the Anker device to its original factory settings?
Resetting the Anker device and starting anew is sometimes helpful when you're
having trouble connecting.
To reset the device:
Make sure the Anker device is connected to a power source,
and press the unit's reset button for 10 seconds before releasing the reset button. The
indicator lights will turn off after several seconds. Wait another 2 minutes to allow the
repeater to restart completely.
8. How do I update the Firmware on my Anker device?
Any newly available firmware upgrades will be published at the Anker website,
http://www.ianker.com/service/download/.
If you find your firmware is out-of-date, please complete the following steps:
Download the updated firmware file to your computer.
Logon to the device's web configuration page. Go to
Management Function
, and
click
Router Upgrade
.
Click
Scan
to upload the new firmware file to your Anker device.
Click
Upload
to apply it.
Wait about 2 minutes to allow the Anker device to restart.
1.
2.
3.
4.
5.
Do NOT select Auto. Click Apply
Enable the WDS Function
Under the
Wireless Settings
navigation menu, click on
WDS Function
and
then check
Enable WDS Function
. A pop-up box will ask you to confirm that
WDS Function cannot work with WPS; please click Yes.
Under
Wireless Basic Station
, fill in the MAC addresses of other repeaters
(up to 4) and click Apply.
Your WDS-standard router setup is now configured. For all the other repeaters
connecting to this main WDS router, please enter this newly configured
device's MAC address to each repeater's configuration page. If using other
Anker Compact Wi-Fi Repeaters to connect, you may set up these connecting
Repeaters using the instructions outlined above for
WDS-standard Repeater
setup
.
2.3
18
