Option 4 Client Mode Installation
Please verify that your router or modem is working properly and that your existing
devices can connect to the Internet successfully.
Step 1. Confirm Live Internet Connection
Step 2. Install the Device
Select your desired mode
Please select your desired Client mode and adjust the three-way switch button
on the side panel of your Anker device accordingly.
Select the device location
For Client mode setup:
Identify the wall socket where you would like to place the Anker device. Ensure
that your desired location has a stable Wi-Fi signal from your original router.
Note:
> 80% signal strength is ideal, you can see the signal strength in Step
4.2a.
Plug the Anker device into the wall socket; the LED indicators will light after 15
seconds. Please allow a 2-minute start up time.
2.1
2.2
2.3
Step 1. Confirm Live Internet Connection
Step 2. Install your Anker Device
Step 3. Connect Computer to your Device
Step 4. Configure your Anker Device
Step 5. Connect to the Wireless Web
If this is not your first time setting up this device, we recommend that you first reset to
start anew, and then follow the steps below. Please refer to the
FAQ Question 7
for
reset instructions.
If you would like to set up your Anker device in Client mode with the Wi-Fi Protected
Setup (WPS) security option, note that WPS may not support all systems and may
result in network conflicts. To move forward and set up Client mode with WPS, please
skip directly to
FAQ Question 9
for more details.
11
