FAQ
From your computer, view your available wireless connections (typically
accessible from the corner of your desktop) and select the Anker network.
Visit your network connections settings and navigate to the IPv4 setting of your
wireless connection. Temporarily change the connection's IP address to
192.168.100.1 (i.e. into the same subnet of your Anker device) and set the
gateway to 192.168.100.253 (i.e. your Anker device's IP address). Please refer to
FAQ Question 2
for details.
Connect your computer to the Anker device through cable (if on Client mode) or
wirelessly (if on Repeater, AP-Bridge or AP-Router mode).
Open a web browser on your computer, and type 192.168.100.253 to reach the
device's configuration page. When the log-on dialogue is displayed, enter your
default UserName/Password: admin/admin to logon.
Among the list of connections, right click the active Anker network connection,
either "Wireless Connection" (for AP, Repeater mode configuration) or "Local
Connection" (for Client mode configuration).
Click "Properties" in the pop-up menu. The "connection properties" window will
appear.
1. How do I login to configure my repeater's settings?
Please follow the steps below. If your Anker device is set to
Client
or
Repeater
mode,
please skip
Steps A and B.
2. How do I temporarily change my computer's IP address to 192.168.100.1 and
the gateway setting to 192.168.100.253?
Please follow the steps below:
Anker Compact Wi-Fi Repeater
A.
B.
C.
D.
Open the IP setting dialog on your computer
For PC users
Windows 7
Go to
Start > Control Panel > Network & Sharing Center > Change Adapter
Settings (or Manage Network Connections)
.
Windows XP
Go to
Start > Control Panel > Network Connections
.
A.
a.
b.
13
