74
Step D
C. Press the setting key to enter the
overlapped sewing setting interface.
Range: 0~9
。
Operation
：
Press A, B, C or D to enter the
overlapped sewing setting interface.
At here, we set the stitch number
of step A, B and C at 4 respectively.
The total step number (D) at 5.
Therefore the system will perform the
step A for once, step B for twice and
step C for twice. After the setting, user
can press
to save and quit.
3.11.2 Program Sewing
In program sewing, user can set 20 steps at most, and each step can contain 500 stitches at
most.
In the program sewing, if one step is set as thread-trimming or its stitch number is set at 0, the
following steps will be canceled.
www.garudan.cz