103
3
、
Save Customized Parameter
Press
to have access to the
interface for saving parameters, where user
can save the parameter value after the
setting.
Click
or
to confirm the
position for saving that parameter. Then
click
to save it.
After the saving, the system will return
to the upper interface automatically.
[Note] The parameters for repair and
maintenance can not be saved
4
、
Load Parameters Saved by User
Have access to that interface. Check
the content on button “Customized
Parameter (Y/N)”. If it is Y in the bracket, it
means that position has customized
parameter.
Click that key and press
to
reload the corresponding parameter. After
the operation, the system will return to the
upper interface.
3.13.5 Parameter Encryption
User can set the password in each level under the parameter setting interface, so as to avoid the
artificial mis-operation.
www.garudan.cz