100
1
、
Enter Parameter Transfer Interface
：
Press
in Information
Mode interface to enter the parameter
management interface, where user needs
press
.
2
、
Back up Parameters
In the interface of parameter recovery
and back-up, the default setting is to back-up
the parameters.
After inserting the U disk, user needs
press
. After the operation, the system
will create catalogue called as “bakParam” in
U disk automatically. The file “backup.
param” within that catalogue is the
parameter back-up file
[Note]: the file with the same name will be
replaced with new data. The original data
will be lost.
In parameter recovery operation, user
can press
to shift to recovery mode.
www.garudan.cz