22
Setting Method
：
1
、
Select “Base Line Position”
Enter the interface for setting general
parameter, select “Base Line Position”
and press “P1-4”.
2
、
Set Position of Base Line
As shown in right picture, there are
“Center”, “Left” and “Right”. Press
to confirm the selection.
3.3.3 Setting of the Feeding Amount
When user uses the different standard parts, he can set the max feeding in normal direction and the
max feeding in contrary direction.
【
Note
】
This function is only available for dual-stepping model
。
Setting Method
：
www.garudan.cz