Anita Garudan GZ-539 Series, User Manual, Page: 80 / 155

70
：
Needle Up Stop
[Note] It can not be set when the current step is
overlapped sewing or free sewing
H Presser Position
Set the presser position of current step
：
Presser Down Stop
：
Presser Up Stop
[Note] It can not be set when the current step is
overlapped sewing or free sewing
I Presser Up Time Set the presser up time at current step. Range:0.1~99.9s
J Cancel Press it to cancel the operation and quit
K Enter
Press it to save the settings and enter the interface for
setting the cyclic sewing.
L Step Deletion Delete the current step
Operation
：
1
、
Edit Current Step
Enter the edition interface of
cyclic sewing. Adjust A to select the
current step and check the information.
In this example, all the steps are empty,
so user has to start the edition from
step 1.
B
A
www.garudan.cz