CNC Motion Setup/Testing Utility
P/N 70000510B
8
All rights reserved. Subject to change without notice.
31-January-05
Balancing Motion Control Axes
To balance the outputs properly, all connections between the Motion
Control Board and the servo amplifiers must be complete.
Perform all of the adjustments on one axis at a time. Make the
adjustments in the following order:
1. Select an axis
2. Balance the Motion Control Board outputs
3. Balance the Servo Amplifier outputs
4. Set Servo Amplifier gain
5. Repeat for all axes
Servo Drive Test Board
Each CNC that uses ANILAM servo amplifiers (P/Ns 33000039 or
33000123) includes a Servo Drive Test Board, P/N 33000102. During
machine operation, the board provides convenient access to critical
signals for alignment and troubleshooting. Refer to
Figure 4
.
NOTE:
The test board only works with amplifiers supplied by ANILAM.
Figure 4, ANILAM Servo Drive Test Board, P/N 33000102
