Modular
Hybrid
Component
MDVR
9 0 5
1
SD Card Slot
Remote
Rec. SD
Rec. 1
Rec. 2
A/V
Output
12V DC
Output
Host
Reset
Reset
Power Supply
GPS
PWR
PWR
Link
Main Board
Slave
110
2
3
Modular
Hybrid
Component
MDVR
9 0 5
4
2
AngelTrax
| 63
INSERTING A HARD DRIVE FROM ANOTHER DVR INTO THE
HYBRID QUEST™ WILL AUTOMATICALLY FORMAT THE DRIVE,
ERASING ALL RECORDED DATA THAT THE HARD DRIVE
CONTAINS. PLEASE BE SURE TO BACK UP ANY SENSITIVE
MATERIAL STORED ON A HARD DRIVE BEFORE INSERTING IT
INTO THE HYBRID QUEST™.
1. Using the supplied keys, remove the front cover from the
DVR by turning the medium-sized key (905) clockwise
(see Figure 1).
2. Retrieve the new hard drive from the box. Slide the hard
drive into the second slot from the top in the front of the
DVR (see Figure 2).
3. If your DVR has a lock on the main board, use the following
instructions:
4. Using the smallest key supplied (1102), lock the hard drive
into the slot by turning the main board key lock clockwise,
until the notch is in the ‘down’ position (see Figure 3).
5. Replace the front cover, aligning the tabs on the bottom of
the door with the notches on the bottom of the DVR. Insert
the medium-sized key (905), and push the top of the door
closed. Turn the key counter-clockwise to lock the door
(see Figure 4).
Hybrid Quest™ DVRs are some of the most advanced mobile recording devices available. These rugged devices are based on our
patented- component technology, ensuring worry-free service for years to come. However, should you have any question or concerns,
please contact technical support at the AngelTrax corporate office at 1.800.673.1788.
Replacing the Hard Drive
Section 8: Servicing Your Hybrid Quest™ DVR
