7
8
9
AngelTrax
| 54
Sub Menu (Cont.)
CAUTION:
THE UPDATE CODE FEATURE IS FOR
ANGELTRAX PERSONNEL ONLY.
DO NOT ADJUST.
Factory Default
1. From the Sub Menu, select the Factory Default feature (see
Figure 7) using the arrow buttons on the remote, and
press ENTER.
2. Press the plus or minus buttons on the remote to change
the Load Factory Default option from NO to YES (see Figure
8). Press ENTER on the remote to reset all Hybrid Quest™
settings back to the factory default settings.
3. Press the plus or minus buttons on the remote to change
the Debug Mode setting from NO to YES (see Figure 9 - this
feature will be added in a future firmware update).
4. To save your changes and return to the Sub Menu, press the
Menu button on the remote.
Update Code
