15
16
AngelTrax
| 57
Sub Menu (Cont.)
Alert Setup
(Optional Feature)
This feature is used to set up wireless GPRS notification alerts
sent via text message or email. Operational only with the use of
a LAN or cellular wireless connection.
1. From the Sub Menu, select the Alert Setup feature (see
Figure 15) using the arrow buttons on the remote, and
press ENTER.
2. Alert Setup features (see Figure 16) are used for notification
when the unit is set up to send GPRS wireless notifications.
Each feature can be set up for the following notifications:
• Enable: Sends user a notification each time an alert
feature occurs.
• Once: Sends the user a one-time notification.
• Disabled: Turns off the notification feature.
3. From the Sub Menu, use the arrow buttons on the remote to
navigate to the Alert Setup feature, and press ENTER. The
following features are available in the Alert Setup menu:
Panic:
Notification for panic button use
Video Status:
Notifies the user if any of the cameras stop working
Over Speed:
Notification when driver exceeds the preset speed limit
Over G-Force:
Notification of the impact sensors for sudden stops or collisions
Start Recording:
Notification of vehicle ignition and starting motion
Stop Recording:
Notifies user if unit stops recording for any reason
HDD Fail:
Notifies user of problems with the hard disk drive
DVR Boot Up:
Notifies user of system boot-up
Stop Arm:
Notifies user each time the stop arm is activated to load/unload passengers
Clock Set to GPS Time:
Notifies user when the DVR has reset time to GPS satellite
DVR ID Change:
Notifies user if someone has changed the DVR ID settings
HDD Recycle Mode:
Notifies user if the hard disk drive has been taken out of Recycle mode
SD Recording Status:
Notifies user if SD card in daughter board stops recording
Date/Time Change:
Notifies user if the Date/Time has been manually changed
Power Key Off:
Notifies the user when the vehicle ignition has been turned off
Snapshot Source:
Notifies the user of a panic event via text message or email. The message will include a snapshot
JPEG from the onboard camera set here.
