- 38 -
3354462_ATG_ut_GB
ENGLISH
GB
Alarm
Fault
Remedy
Notes
E10
Electrical component com-
partment has overheated.
The oven solves the problem
on its own.
The oven’s functions are ena-
bled so cooking cycles can be
carried out.
E11
E13
E14
Electronic circuit board dia-
gnostics tripped.
Inform the after-sales service.
The oven’s functions are disa-
bled so no cooking cycles can
be carried out.
E15
ROI pre-fi lter expired.
Replace the ROI pre-fi lter as
soon as possible.
The oven’s functions are ena-
bled so cooking cycles can be
carried out.
E16
Osmosis membrane expired.
Replace the ROI osmosis mem-
brane as soon as possible.
The oven’s functions are ena-
bled so cooking cycles can be
carried out.
E19
The humidity probe has failed
or is not properly connected.
Inform the after-sales service
The oven’s functions are ena-
bled so cooking cycles can be
carried out.
E20
Setup error
Inform the after-sales service
The oven’s functions are disa-
bled so no cooking cycles can
be carried out
E21
The washing cycle has been
interrupted because there is
no cleaner.
Check the pipe position and
the level of cleaner in the tank;
top up if necessary and restart
the washing cycle.
If the problem persists, call the
after-sales service.
E22
The washing cycle has been
interrupted because there is
no descaling cleaner.
Check the pipe position and
the level of descaling cleaner
in the tank; top up if necessary
and restart the washing cycle.
If the problem persists, call the
after-sales service.
E23
The washing cycle has been
interrupted during the fi nal sa-
nitization stage.
Press RESET and rinse the co-
oking chamber thoroughly by
hand.
If the problem persists, call the
after-sales service.
E24
E26
Automatic cleaning system fai-
lure.
Check that no residues of cle-
aning products have been left
inside the cooking chamber.
If the problem persists, call the
after-sales service The oven’s
functions are enabled so coo-
king cycles can be carried out.
E25
System fi lling procedure not
completed.
Check the position of the pipe
and the level of the descaling
in the container; if necessary,
top it up and re-launch the au-
tomatic cleaning cycle.
If the problem persists, call the
after-sales service.
E27
Failure test gas
Inform the after-sales service
The oven’s functions are ena-
bled so cooking cycles can be
carried out
E28
Valve has failed to close/open.
Press Reset.
Inform the after-sales service.
E29
Core probe not inserted in the
food.
Insert the core probe.
The oven’s functions are ena-
bled so cooking cycles can be
carried out.
E30
Faulty panel board.
Inform the after-sales service
The oven’s functions are disa-
bled so no cooking cycles can
be carried out
E32
Faulty drain valve.
Inform the after-sales service
The oven’s functions are disa-
bled so no cooking cycles can
be carried out
E33
There is no drain water, or
there is insuffi
cient water pres-
sure during washing.
Inform the after-sales service
The oven’s functions are disa-
bled so no cooking cycles can
be carried out
E34
Washing error.
Inform the after-sales service
The oven’s functions are disa-
bled so no cooking cycles can
be carried out
