Angelo Po 1N1FAAG, User Manual

Page: 116 / 138

- 14 - 3319970_inst_GB_rev.1 ENGLISH
GB
ADJUSTING TOP BURNER PRIMARY AIR (4 KW)
To carry out this operation, proceed as follows.
1)
Turn off the gas supply tap.
2)
Pull off the knob (A) .
3)
Take out the screws (C) and take down the
dashboard (B) .
4)
Undo the screw (D) .
5)
Set the burner mount (E) at a distance of at a
distance of 17 mm and tighten the screw (D) .
6)
Replace the control panel (B) and the knob (A)
on completion of the operation.
B
C
C
A
D
ADJUSTING TOP BURNER PRIMARY AIR (7 KW)
To carry out this operation, proceed as follows.
1)
Turn off the gas supply tap.
2)
Pull off the knob (A) .
3)
Take out the screws (C) and take down the
dashboard (B) .
4)
Undo the screw (D) .
5)
Set the burner mount (E) at a distance of 20
mm and tighten the screw (D) .
6)
Replace the control panel (B) and the knob (A)
on completion of the operation.
B
C
C
A
D
ADJUSTING TOP BURNER PRIMARY AIR (10 KW)
To carry out this operation, proceed as follows.
1)
Turn off the gas supply tap.
2)
Pull off the knob (A) .
3)
Take out the screws (C) and take down the
dashboard (B) .
4)
Undo the screw (D) .
5)
Set the burner mount (E) at a distance of 20
mm and tighten the screw (D) .
6)
Replace the control panel (B) and the knob (A)
on completion of the operation.
B
C
C
A
D