- 4 -
3319970_inst_GB_rev.1
ENGLISH
GB
PROCEDURE FOR REQUESTING SERVICE
For all requirements contact the agents or the
headquarters of Angelo Po which can be found
in the contacts section of the website http://
www.angelopo.com.
When requesting service, state the data provide
on the nameplate and provide a description of
the fault.
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The nameplate shown here is fi tted directly to
the appliance. It contains references and all es-
sential information for operating safety.
A)
Extra nameplate
a1)
Country of use
a2)
Appliance category
a3)
Type of gas
a4)
Gas pressure
a5)
Type of fume exhaust vent
B)
Nameplate
b1)
Appliance model
b2)
Type of customisation
b3)
Manufacturer identifi cation
b4)
Serial number
b5)
Protection class
b6)
EC conformity mark
b7)
Reference standard
b8)
EC certifi cate number
b9)
Product family type
b10)
Type of gas
b11)
Rated power (kW)
b12)
Gas consumption
b13)
Testing gas indicator frame
b14)
Voltage (V)
b15)
Frequency (Hz)
b16)
Electricity power consumption (W)
b17)
Test voltage indicator
b18)
Date of construction
C)
TTesting gas plate
c1)
Type of gas
c2)
Gas pressure
The installer must select the plate
(A)
, and ap-
ply it alongside the nameplate relating to the
country of use, and must mark the relative ap-
pliance class (Type A = standard fume exhaust
vent).
If the appliance is to be used with the same type
of gas as used by the manufacturer for testing,
the installer has to remove the plate (
C
) and ap-
ply the indicator
(b13)
against the data of the gas
for use on the nameplate.
