Anest Iwata E-M20 Series, Instruction Manual

Page: 44 / 70

- 2 -
1. Specifications
１．１ Important specifications
Max. operating pressure
Air ： 0.68MPa, Paint ： 0.35MPa
Ambient temperature range
5
℃〜
40
℃
Ambient humidity range Less than 70%RH
１．２
Main specifications
No. Items Specifications Remarks
E-M25 series E-M20 series
1
High voltage generation
Built-in high voltage booster Cartridge system
2 Max. operating voltage
-60kV During no-load
3 Dimensions L×W×H
255×63×239 255×63×222
When fluid adj. knob is fully closed
4 Mass
585g 545g Without low voltage cable and fluid tube
5 Applicable electrostatic
controller
Electrostatic controller E-SC12BH
（
option
）
or
multi-gun control system E-MC12 （ option ）
6 Connection of low voltage
cable
Connector system
7 Air nipple / fluid nipple thread
specifications
G1/4 （ air nipple ）
G3/8(fluid nipple)
G1/4(air nipple)
G3/8(cap nut)
8
Applicable paint ※
1
） General paint ：
Reference
→
electric
resistance of paint is
about over 30M
Ω･
cm
※２）
Low voltage paint
Reference
→
electric
resistance of paint is
about less than 30M
Ω・
cm
※２）
Regarding metallic paint, please ask the
shop which sold it to you.
※１）Regarding details of applicable paint, ask the shop which sold it to you or us.
※２）The figures are measured by our paint tester（EST-1C：option） after paint viscosity is adjusted.
１．３
Specification about atomization
No. Items
specifications
（□： blank ）
remarks
E-M2 □ - □□ C1 □ E-M2 □ - □□ C5 □ E-M2 □ - □□ L1 □
1 Air cap set
Conventional atomization type
HVLP atomization
type
2 Fluid nozzle
Nozzle orifice 13: φ 1.3mm 、 15: φ 1.5mm 、 18: φ 1.8mm
HVLP atomization
type
3 Standard spray air
pressure
（
static pressure at
gun handle ）
0.30MPa 0.35MPa 0.20MPa
4 Air consumption
About 500Nl/min
During continuous
painting at standard
spray pressure
5
Standard pattern
width
/ spray
distance
About 350mm/250mm
When spraying
250ml/min
About 250mm/250mm
When spraying 250ml/min
About 240mm/200mm
When spraying
160ml/min
Melamine resin
paint, paint viscosity
21sec/3FC
L L
H H
W
E-M25 E-M20