Andrisoft Wanguard 5.2, User And Administrator Manual

Page: 27 / 73

WANGUARD 5.2 User Manual & Administrator's Guide
Graphs can have an automatcally-generated ttle for the “Default” opton, no ttle for the “None”
opton, or you can enter your own text that will be rendered as a ttle.
●
Graph Legend
Select the details of the graph's legend.
●
Consolidaton
If you are interested in spikes, select the MAXIMUM aggregaton type. If you are interested in average
values, select the AVERAGE aggregaton type. If you are interested in low values, select the MINIMUM
aggregaton type.
●
Graphs Stacking
◦
Stack Sensors – If unchecked, each selected Sensor generates diferent graphs. If checked, all
selected Sensors generate single graphs that contain combined data
◦ Stack Decoders – When is checked, the graphs will contain data from all selected decoders
◦
Stack IPs – Un-check this opton if you want a diferent trafc graph displayed for every IP address
contained in the IP class or IP Group. Use carefully because when this opton is used with a /24
CIDR then 256 trafc graphs are displayed, one for each IP address in the “C” class
◦
Stack Conficts – If decoders can be included one within the other (e.g. TOTAL contains TCP that
contains HTTP and HTTPS), the graph will display stacked decoders to show the most specifc ones.
This generates both accurate and intuitve trafc graphs. In the example, TOTAL will show as TOTAL
OTHER and TCP as TCP OTHER. But when you select TCP, HTTP and TCP+SYN as decoders, then
the TCP+SYN decoder can be included both in TCP and HTTP, thus generatng a decoder confict.
Check this to stop detectng conficts between decoders, but keep in mind that graphs might not be
as accurate
◦
Stack Recursively – When is checked, subnet graphs can be created contained IPs graphs.
The number of decoders, Data Units and aggregaton types can be modifed in the Storage & Graphs
Confguraton, see page 32.
IP Accounting
IP Accountng allows you to generate various trafc accountng reports for the IP class, host or IP Group:
●
Decoders & Data Unit
Select the decoders that analyze the trafc you're interested in. Data Units available: Packets , Bits and
Bytes .
● Report Type
Select the interval you want to aggregate the accountng data: Daily , Weekly , Monthly , Yearly .
●
Sum IPs
Un-check this opton if you want a diferent trafc accountng report displayed for every IP address
contained in the IP class or IP Group. Use carefully because when this opton is used with a /24 CIDR
then 256 trafc accountng reports are displayed, one for each IP address in the “C” class.
●
Sum Sensors
- 26 -