WANGUARD 5.2 User Manual & Administrator's Guide
Reports » IP Addresses & Groups
This chapter describes how to generate complex trafc reports for IP addresses, IP subnets and IP Groups.
The
Reports » IP Addresses
panel allows the quick generaton of IP trafc reports by entering the IP / CIDR
in the upper side of the Panel, or by selectng an IP class or host from the expandable tree below.
The
Reports »
IP Groups
panel lists all IP Group names that exists in IP Zones. You can search or flter them
by entering a sub-string contained in the IP Group's name you're interested in. Use IP Groups to generate reports for
clients that have multple allocated IP classes. You just have to defne those IP classes with the same IP Group name.
If the reports are empty, check if the IP addresses and subnets have in IP Zones the “IP Accountng”
parameter and “IP Graphs” parameter set to
Yes
.
Clicking IP Addresses or IP Groups opens the same type of tab that contains few sub-tabs on the botom
side. All sub-tabs use the following common toolbar felds:
●
Sensors
Select the Sensors you're interested in or “All” to select all Sensors. Multple selectons can be made.
Administrators can flter which Sensors are available to users.
●
Time Frame
Select predefned tme-frames or enter your own by selectng “Custom...”.
IP Dashboard
The IP Dashboard allows you to group the most relevant data for IPs, subnets and IP Groups to a single tab.
The IP Dashboard's confguraton does not apply to a partcular IP, subnet or IP Group. The changes you
make here will be visible for each IP, subnet or IP Group.
The operaton of Dashboards is documented in the Reports » Dashboards chapter on page 16.
IP Graphs
IP Graphs allows you to generate various histograms for the IP classes, host or IP Group:
●
Decoders & Data Unit
Select the decoders that analyze the trafc you're interested in. Data Units available:
Packets
,
Bits
and
Bytes
.
●
Graphs Size
You can select predefned sizes or you can enter your own size in the “<X pixels> x <Y pixels>” format.
●
Graph Title
- 25 -
Summary of Contents for Wanguard 5.2
Page 1: ......
