DN:KD-7965-SMSY01 V3.0
Operation Guide
Template version:1
7/15
Picture 4 Picture 4-1 Picture 4- 2 Picture 4-3
c. Voice volume setting: Once you have selected a language, a column of bar will appear on the LCD.
Keep on pressing the button ―MEM‖ again, you can adjust the volume.
See picture 4-2 & 4-3
. The
higher the bars, the louder the volume. Release button ―MEM‖ at your desirable volume for
confirmation.
5. CONNECTING THE CUFF TO THE MONITOR
The cuff is attached to the monitor when it is packaged. Should the cuff
become unattached, align the two plugs and four brackets of the cuff with the
plug sockets and bracket sockets of the monitor and press the cuff to the
monitor until the plugs and brackets are securely attached.
6. APPLYING THE CUFF
a.
Place the cuff around a bare wrist 1-2cm above the wrist joint on the palm side of the wrist.
b.
While seated, place the arm with the cuffed wrist in front of your body on a desk or table
with the palm up. If the cuff is correctly placed, you can read the LCD display.
c.
The cuff must be neither too tight nor too loose.
Note:
Please refer to the cuff circumference range in “SPECIFICATIONS” to make
sure that the appropriate cuff is used.
Measuring on same wrist each time.
Do not move your arm, body, or the monitor during measurement.
Stay quiet, calm for 5 minutes before blood pressure measurement.
Please keep the cuff clean. If the cuff becomes dirty, remove it from the monitor and clear it
by hand in a mild detergent, then rinse it thoroughly in cold water. Never dry the cuff in
clothes dryer or iron it. Clean the cuff after the usage of every 200 times is recommended.
7. BODY POSTURE DURING MEASUREMENT
Sitting Comfortably Measurement
a. Be se
ated with your feet flat on the floor, and don’t cross your legs.
b. Place palm upside in front of you on a flat surface such as a desk or table, with
your elbow resting on a chair or table.
c.
The middle of the cuff should be at the level of the right atrium of the heart