Andon KD-7965 Operation Manual Download Page 3

DN:KD-7965-SMSY01 V3.0   

                                                                                      Operation Guide 

 

Template version:1 

3/15 

INTENDED USE 

Fully  Automatic  Electronic  Blood  Pressure  Monitor  is  for  use  by  medical  professionals  or  at  home  and  is  a 

non-invasive  blood  pressure  measurement  system  intended  to  measure  the  diastolic  and  systolic  blood 

pressures and pulse rate of an adult  individual by  using a non-invasive technique in  which an  inflatable cuff is 

wrapped around the wrist. 

CONTRAINDICATION 

It is inappropriate for people with serious arrhythmia to use this Electronic Sphygmomanometer. 

PRODUCT DESCRIPTION 

Based on Oscillometric methodology and silicon integrated pressure sensor, blood pressure and pulse rate can 

be measured automatically and non-invasively. The most recent 60 measurements can be stored in the memory 

with  date  and  time  stamp.  The  voice  function  will  ease  the  operation.  The  Electronic  Sphygmomanometer 

corresponds to the below standards:IEC 60601-1:2005/EN 60601-1:2006/AC:2010 (Medical electrical equipment 

--  Part  1:  General  requirements  for  basic  safety  and  essential  performance),  IEC60601-1-2:2007/EN 

60601-1-2:2007 /AC:2010 (Medical electrical equipment -- Part 1-2: General requirements for basic safety and 

essential  performance  -  Collateral  standard:  Electromagnetic  compatibility  -  Requirements  and  tests),  IEC 

80601-2-30

2009+Cor.2010/EN  80601-2-30:2010(Medical  electrical  equipment 

–Part  2-30:  Particular 

requirements 

for 

the 

basic 

safety 

and 

essential 

performance 

of 

automated 

non-invasive 

sphygmomanometers)EN  1060-1:  1995  +  A1:  2002  +  A2:  2009  (Non-invasive  sphygmomanometers  -  Part  1: 

General requirements), EN 1060-3: 1997 + A1: 2005 + A2: 2009 (Non-invasive sphygmomanometers - Part 3: 

Supplementary  requirements  for  electro-mechanical  blood  pressure  measuring  systems),  ANSI/AAMI 

SP-10:2002+A1:2003+A2:2006. 

SPECIFICATIONS 

1.  Product name: Blood Pressure Monitor 

2.  Model: KD-7965 

3.  Classification: Internally powered, Type BF applied part,IPX0,No AP or APG, Continuous operation 

4.  Machine size: 88mm x 66mm x 28.7mm 

5.  Cuff circumference: 14-19.5cm/5.5-7.7inches 

6.  Weight: about 142g (exclude batteries) 

7.  Measuring method: oscillometric method, automatic air inflation and measurement 

8.  Memory volume: 60 times with time and date stamp 

9.  Power source: batteries :2 ×1.5V

SIZE AAA 

10.    Measurement range: 

Cuff pressure: 0-300mmHg 

Summary of Contents for KD-7965
















Reviews: