Andon KD-7965 Operation Manual Download Page 6

DN:KD-7965-SMSY01 V3.0   

                                                                                      Operation Guide 

 

Template version:1 

6/15 

   

The monitor, the batteries and the cuff, must be disposed of according to local regulations at the 

end of their usage. 

2. TOUCH SCREEN SWITCH 

Your  monitor  has  a  touch  screen  as  equipment.  Be  careful  not  to  touch  the  screen  by  mistake.  Keep  the 
touch switch in ―OFF‖ position when the monitor is not in use to avoid unintentional operation. Please keep 

the  touch  switch  in 

―ON‖ position to operate the monitor. The touch switch is in 

―ON‖ position,  press the  touch screen (START button or MEM  button),  you can 

hear the beep. 

3. CLOCK AND DATE ADJUSTMENT 

a.

 

Once you install the battery or turn off the monitor, it will enter Clock Mode, and LCD will display time 

and date. 

See picture 3.

 

 

 

 

 

 

         

Picture 3                  Picture 3-1                  Picture 3-2                  Picture 3-3                Picture 3-4

 

b.

 

While  the  monitor  is  in  Clock  Mode,  pressing  both  the  ―START‖  and  ―MEM‖  button  simultaneously 

(touch  screen  switch  in  ON  position),  the  month  will  blink  at  first.

  See  picture  3-1.

  Press  the  button 

―START‖ repeatedly, the day, hour and minute will blink in turn. 

See picture 3-2 & 3-3 & 3-4. 

While the 

number  is  blinking,  press  the  button  ―MEM‖  to  increase  the  number.  Keep  on  pressing  the  button 

"MEM", the number will increase fast. 

c.

 

You can turn off the monitor by pressing ―START‖ button when the minute is blinking, then the time and 

date is confirmed. 

d.

 

The monitor will turn off automatically after 1 minute of no operation, with the time and date unchanged. 

e.

 

Once you change the batteries, you should readjust the time and date. 

4. VOICE SETTING 

a.  Ensure the touch screen switch in ON position. 

b.  Voice language setting: In clock mode, you can select the voice language by keeping on pressing the 

button ―MEM‖. Now LCD blink ―L0‖, ―L1‖, ―L2‖ … ―Ln‖

 (see picture 4 & 4-1)

 

circularly. ―L0‖ represents 

closing  voice  function,  ―L1‖  represents  language  1,  ―L2‖  represents  language  2,…,―Ln‖  represents 

language n, and so on. Yo

u can select the wanted language by releasing button ―MEM‖ when display 

the corresponding language code. 

Summary of Contents for KD-7965
















Reviews: