Deadband exists for each Diversion Setpoint. Values are
entered in either units of
O
F or
O
C, as determined by setup.
Values are whole numbers unless decimal places active.
ÿø
TO ADVANCE TO NEXT SELECTION
ñ
Note: Previous two parameters will be
repeated for each of the active
Diversion Setpoints.
STLR CURRENT SP
[ 1 THROUGH 5]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This value allows the selection of currently active STLR
Diversion Setpoint while in the
STLR Control er Program
Menu.
l
ñ
NOTE: The new Diversion Setpoint does NOT take effect until
the unit Program Jumper is moved from PROGRAM to
RUN position.
ñ
NOTE: This parameter will not be visible if only ONE Diversion
Setpoint is active.
This completes STLR Controller program options -
ÿú
to return to main display,
õ
to
return to start of CONTROLLER SETUP MENU.
Revision 3.0
Section 6
4
