7.
Program Reference - Configuration Menu
ô
CAUTION: Unless otherwise specified, the model AV-9900 HTST will be provided
pre-programmed from the Factory. Prior to making modifications, it is
recommended that you record current settings.
7.1.
Configuration Menu - Instrument Settings
7.1.1.
Instrument Settings - Shunt Position - RUN MODE
While in the RUN MODE, changes may be made to parameters which affect the Instrument operation. All
parameters may not be accessible, as many are dependent on activation by another parameter. Access is
gained as follows:
ñ
Note: Refer to General Instrument Operations section for instructions on
identifying RUN and PROGRAM mode of operation.
From the Normal Display,
ÿø
key until the following is visible:
SELECT <->
CONFIGURATION
With CONFIGURATION shown in the lower display line,
ÿö
key. The following will
now be visible on the user display:
CONFIGURE <->
INSTRUMENT
SETTINGS
With INSTRUMENT SETTINGS shown in the lower display line,
ÿö
key. Available
parameters are:
TAG DISPLAY OPTION
[NOT
DISPLAYED]
[IN CONTINUOUS MODE]
[IN SEQUENTIAL MODE]
[IN BOTH MODES]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter selects which display modes will allow the
Instrument Tag to be displayed. The Instrument Tag is a
user entered string which may be viewed on the display.
Revision 3.0
Section 7
1
