Page 3-3
3.3 USER (“A”) MENU
3.3.1 ENTERING THE USER MENU
NOTE: The UO-200 only supports the A5 (Units Key) and A10 (Auto Power Off) functions. Please
disregard the other listed functions.
1. Enter the Setup (“F”) menu by following the directions in Section 3.2.1 or 3.2.2.
2. Use the right or left directional keys shown in Figure 3-3 to move right or left in the
Setup (“F”) menu until the indicator shows ” A 1”.
3.3.2 NAVIGATING IN THE USER MENU
Use the directional keys shown in Figure 3-3 to move around in the User Menu Chart shown
in Figure 3-4 on the following page.
1.
To move to a new “A” heading, use the TARE (left) or ON/PRINT (right) key to move
right or left in the User Menu Chart.
2.
To move to the selection level, press the ZERO/OFF (down) key once. The current
saved selection is shown.
3.
To view the available selections for the current “A” heading, use the TARE (left) or
ON/PRINT (right) key to move through the selection field.
4.
To save a new selection, press the NET/GROSS (Set) key .To exit without saving,
press the UNITS (up) key to return to the current “A” heading.
5.
Repeat Steps 2 through 5 until the User Menu is programmed.
SET
Figure 3-3: User Menu Key Assignments
Continued =>
Visit www.balances.com Your Authorized A&D Dealer
