Page 5-1
CHAPTER 5: USER MENU DESCRIPTIONS AND PROCEDURES
NOTE: The UO-200 only supports the A5 (Units Key) and A10 (Auto Power Off) functions. Please
disregard the other listed functions.
5.1 USER MENU DESCRIPTIONS
This section provides more detailed descriptions of the selections found in the User Menu Chart.
Factory-set defaults are shown in bold with a checkmark (
√
).
NAME/CODE DESCRIPTION CODE/VALUE
A5
Disable the
UNITS Key
Allows the UNITS key to be disabled so that an operator cannot
accidentally press the key and change the displayed units.
"0" = Disable the Units key "1" = Enable the Units key
0
1
√
A10
Auto Power Off
Actuates the function that allows entry of the desired automatic turn
off time in minutes. Pressing the
ZERO
key to scroll down one level
begins the sequence.
“0” = Disabled (Always ON)
0 - 30
2
√
5.2
USER MENU PROCEDURES
USER MODE KEY FUNCTIONS
ZERO
GROSS
NET
TARE
SET
UNITS
Figure 5-1: User Menu Key Assignments
5.2.1 Auto Power Off Entry (A10)
1. While in the User Menu mode, scroll to "
A 10
", then scroll down once using the
ZERO/OFF key to enter the Auto Power Off menu.
2.
The display will momentarily show the current line feeds value.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual auto power off value. Increase the flashing digit by pressing the
UNITS key. Decrease the flashing digit by pressing the ZERO/OFF key. Pressing
the ON/PRINT key or the TARE key will change the position of the flashing digit.
4. After setting the exact value, press the NET/GROSS key to save the auto power off
value. The display will show "
SET
" momentarily, then revert back up to A10.
Visit www.balances.com Your Authorized A&D Dealer
