Page 7-2
7.2 KEYBOARD
The keyboard is composed of five function keys. Refer to Figures 7-2 for the overall layout and key
locations.
FIGURE 7-2: Function Keys Layout
7.2.1 FUNCTION KEYS
Units
– This key toggles the indicator between lb and kg if enabled in the User (“A”) menu.
See Chapter 5 for more information.
Zero/OFF
- When held for six seconds shuts the indicator off. Otherwise, this key sets the in-
dicator to display zero provided the following conditions are met:
1. The indicator is displaying Gross weight.
2. The displayed weight is within the zero reset range that is programmed in F4 of the Setup
(“F”) Menu.
3. The scale is not in overload (see Appendix B for error codes).
Net/Gross
- This key toggles the indicator between Gross weight and Net weight only if a
Tare has been established.
Tare
- This key is used to establish a Tare provided the following conditions are met:
1. The indicator is not at or below Gross zero.
2. The scale is not in overload (see Appendix B for error codes).
ON/Print –
When off, turns the indicator on. The Print function is not available on the UO-
200.
7.3 GENERAL SCALE OPERATION
7.3.1 WEIGHING AN ITEM
1. Select the desired weighing unit by pressing the UNITS key until that unit is indicated on
the display.
2. If necessary, press the ZERO/OFF key to obtain a weight reading of zero.
3. Place the object to be weighed on the scale’s platter and allow the weight indication to
stabilize. If the item weight exceeds the scale’s weight capacity, it displays “
000000
”.
4. Read the weight shown on the display.
UNITS
ZERO
OFF
NET
GROSS
TARE
ON
Visit www.balances.com Your Authorized A&D Dealer
