AD-4430B
- 25 -
5.3.6.
The Calibration Function
(
)
Step 1 Press the
+
key to enter to the calibration mode and display
.
Press the
key to start the calibration and display
.
Step 2 Select
using the
key and press the
key.
Step 3 Select a desired function number using the
key and press the
key.
The current data is displayed.
Step 4 When changing data, two methods of parameter selection and digital input depending on
the function are available.
Type
Description of method to change data
Parameter selection Only the available parameter is displayed and blinks.
Select a number using the
key.
Digital input
All the digits are displayed and a digit to be changed blinks.
Select a digit using the
key and
change the value using the
key.
After changing data, press the
key. The next function number is displayed.
When the value is not to be changed, press the
ESC
key to return to the function
number display.
Step 5 Press the
ESC
key to store new data in FRAM and
is displayed.
Press again the
ESC
key to return to the weighing mode.
The blinking decimal point means that the current value is not the weight value.
If a data exceeding the available range is inputted,
is displayed and data is
canceled.
