Analytical Technology PortaSens III D16, Instruction Manual, Page: 30 / 65

PortaSens
III
Portable Gas Leak Detector, Model D16
Operation and Maintenance Manual
Rev-A Feb 2018
- 30 -
Configuring the Data Logger
Table 10 Configuring the data logger.
Description Display
Logging Menu
On the “Main Display” page, touch the “Menu”
button, and then touch the “Logging” button.
This will present the “Logging Menu” page, as
shown on the right.
Data Logger On/Off
On the “Logging Menu” page, touch the “On/Off”
button. The “spin” edit control will appear and
display the current value, as shown on the right.
Touch the up or down arrow to change the
setting, then touch the “Ok” button to save it.
Touch the “Back” button to close the control and
return without saving. The value may be set to
one of the following.
· On – starts data logging
· Off – stops data logging
· Clear – clears data from the current day.
Data Logging Interval
On the “Logging Menu” page, touch the “Interval”
button. The numeric keypad control will appear
and display the current value, as shown on the
right. Use the keypad to enter the new value,
then touch the “Ok” button to save it. Touch the
“Back” button to close the control and return
without saving.
Setting range : 10 sec to 1 hr (default=1 min)