Ax60K Carbon Dioxide Detector
Quick Start Guide - Kiosk Option
Document ref: P0159-804-01
October 2015
Page 4 of 8
1.4
Package contents
The standard Ax60K package contents are listed below. Additional CO
2
Alarms may be
purchased to enable the system to be extended (up to a maximum of four CO
2
Alarms).
Ax60K Carbon
Dioxide
Detector
package
contents
(supplied)
1 x CO
2
Sensor, including:
1 x 2m factory fitted Quick Connect (QC) cable with blue RJ45
connector
1 x 1m factory fitted power cable to power supply unit (PSU)
1 x CO
2
Alarm (additional CO
2
Alarms can be ordered) including:
1 x 2m factory fitted QC cable with blue RJ45 connector
1 x mains power supply unit (PSU) (plug-in type complete with
interchangeable heads to suit the destination country)
1 x PSU securing strip
1 x RJ45 coupler for connecting the cables
1 x hazard labels, information labels, template and Quick Start Guide
Consumables
(supplied)
Wall plugs and screws (fixing kits) for mounting the CO
2
Sensor, CO
2
Alarm
and PSU securing strip to the wall
Tools required
(NOT
SUPPLIED)
PZ1 Pozi screwdriver to suit wall screws
Drill and drill bits for wall plugs
Spirit level, tape measure, ruler
2
Description
2.1
Overview
There are three main components in the Ax60K—the CO
2
Sensor, CO
2
Alarm and PSU.
These are pre-wired to enable an easy installation. The components are shown below.
CO
2
Sensor, pre-wired cables and PSU
CO
2
Alarm, pre-wired cable and coupler
