Ax60+ Multi-Gas
Service Manual
Int. Approved
Document ref: P0159-803-11
September 2019
Page 10 of 62
Copyright © 2015 Analox Ltd. All Rights Reserved.
Commercial in Confidence
Operator input
Software response
Central Display text
Optional text / notes
example, a system with two CO
2
Sensors displays >OK OK. The
‘
>
’ character identifies which
Sensor is highlighted (Sensor 1
is highlighted by default)
million). The example shown
here displays 450 PPM, which
is equal to 0.045%.
NOTE: THE SYSTEM STATUS SCREEN DISPLAYS UP TO FOUR SENSORS. A SPARE
SENSOR LOCATION DISP
LAYS AS: ‘
- - -
’
The bottom line displays the
concentration of measured gas
at the Sensor
Press Cycle
Displays Sensor 2 details (if
installed) and the current level
of measured gas
In this example, Sensor 2 is
not installed
Press Cycle
Displays Sensor 3 details (if
installed) and the current level
of measured gas
In this example, Sensor 3 is
not installed
Press Cycle
Displays Sensor 4 details (if
installed) and the current level
of measured gas
In this example, Sensor 4 is
not installed
Press Cycle
Redisplays the system status
screen
Summary of Contents for Ax60+ Multi-Gas
Page 2: ......
