background image

PHYSICAL

Dimensions:  

W 482 x D 350 x H 45 mm

 

 

 

19”W x 13.8”D x 1.8”H.

(Compatible with a Standard 19” rack, Height = 1 U).

Weight: 

 

4.3 kg / 9.5 lbs.

ENVIRONMENTAL

Cooling air flow from right side to left side

Maximum ambient operating temperature: < 40 °C ( < 104°F).

Operating temperature:  

 

0 to 40 °C / +32 ° to +104 °F

Storage temperature:    

 

-25 to 85 °C / -13° to +185 °F

Operating humidity:    

 

10 to 80% (non condensing)

Input voltage range:    

 

100-240 VAC, 50/60 Hz

Typical consumption:    

 

90 W (with option)

CERTIFICATIONS

CE Compliancy: test following 

 

 

- EN 55022: 2006 / A1: 2007,

 

 

- EN 55024: 1998 / A1: 2001 / A2: 2003,

 

 

- EN 61000-3-2: 2006

 

 

- EN 61000-3-3: 1995 / A1: 2001 / A2: 2005,

Safety : test following:   

- IEC 60950-1: 2005

 

 

 

 

 

- UL 60950-1: 2007

 

 

 

 

 

- CAN/CSA-C22.2 NO. 60950-1

Power supply: IEC/EN/UL/CSA 60950-1, internal,  autoswitchable

Mechanical (in carton): Vibration: IEC60068-2-64

Free fall: IEC60068-2-32, RoHS, WEEE

Environmental specifications

15

• COMMUNICATION PORTS:

REMOTE RS232

Connector:  

DB 9 female

Level: 

 

RS232.

Data Rate:  

9600 Bauds, 8 data bits, 1 stop bit, no parity bit,  

 

 

 

no flow control for normal. DTR & RTS needed for  

 

 

 

upgrade.

Communication specifications

• LAN:

Connector : 

RJ45

Protocol:   

TCP (Transmission Control Protocol) or UDP 

 

 

 

(User Datagram Protocol).

Ethernet:    

Base 10/100

Summary of Contents for Smart Vu






















































Reviews: