Analog way Smart Vu, User Manual

Page: 30 / 53

The
Output
menu also allows you to generate test patterns. The
test patterns available through the Output menu let you quickly and
reliably setup your projectors.
1/ In the menu section, press the EXIT/MENU button and select
Output in the menu by rotating the corresponding knob. Then press
the ENTER button to enter the Output sub-menu.
2/ In the
Output
sub-menu, select the
Test Pattern
menu, then select
the output (Main or Preview) on which you want the test pattern
to appear by rotating the scroll knob. Press the ENTER button to
enter the
Test Pattern
menu. Choose the test pattern you wish to
use in the Test Pattern menu by rotating the scroll knob, and press
ENTER. The chosen test pattern will immediately appear on the
selected screen(s).
3/ Press the EXIT/MENU button twice to return to the main menu.
* NOTE * : Be sure to turn the test pattern off to display your sources
again.
The SVU300 allows users to manipulate a PIP (Picture In Picture)
which you can move, size, crop or zoom, apply transparency or
transitions to.
1/ Press the PIP button. The button will start blinking. On the preview
screen, the layer will appear as a color rectangle, and “00” will be
indicated in the layer rectangle. Layer parameters will appear on
your menu screen once a source has been affected to that layer.
2/ In the Input Selection section, press the source button (#1 to #10)
of the source you wish to affect to the selected PIP. The source
button will start blinking. On your preview screen, the source will
appear in the layer rectangle, and PIP#1 will be indicated in the
layer rectangle.
3/ Press the PIP button, then rotate the scroll knob to access desired
layer attributes (size, position, zoom, border, transparency...) and
press the [ENTER] button in the Layer sub-menu to enter and
parameter layer attributes.
4/ By pressing the source button again, the Image sub-menu appears
on your menu VFD screen. Rotate the scroll knob to access the
desired source attributes (aspect in/out, color, centering, blanking
adjust...) and press the [ENTER] button in the
Image
sub-menu to
enter and parameter source attributes.
5/ Press [TAKE] to view the results on your main screen.
Working with PIPs
PIP configuration
29