The RCS software for your
SQD200
can be viewed as the software version of the
SQD200
front panel menu
section. It allows you to quickly access all of the
SQD200
functions via a single page interface, and easily edit
your settings directly from your laptop or PC.
Before starting with the RCS software, you must establish a connection from your laptop to the
SQD200
you
wish to run.
The RCS software for your
SQD200
is composed of several easily identified sections.
The tabs menu (1) allows you to navigate through the equivalent of the
SQD200
front panel menu items (see
also “The
SQD200
Menu” p.28).
The green window of the RCS (2) represents your Preview window and can be used to parameter sources,
frames, layers and logos directly by clicking on the corresponding button, then navigating through the different
available tabs. The red window of the RCS (3) represents your Main window, and can also be used much like
the front panel of the
SQD200
.
Create user presets directly in the Preview window, by clicking on one of the
four available Preset icons (4) and setting up your preset in the Preview window.
Clear unwanted current Preview Preset with the
[
CLEAR]
button (5), reload a fresh copy of your screen via
the
[
RELOAD MAIN]
button (6), make smooth takes directly with your mouse or trackpad with the virtual T-bar
(7). The
[
TAKE]
button (9) will allow you to view any changes made to your preview screen on your main
screen, Analog Way engineers have even implemented a
[
STEPBACK]
button (8) to quickly return to your
previous setup in case of a manipulation error.
The status section (10) allows for easy monitoring of the connection status.
Software overview
54
1
2
3
7
10
9
8
4
5
6
