Capturing Logos
To capture a Logo, display the exact content you want to save on the main screen, you can use the
[
FREEZE]
button if you want. Then follow these steps:
Logos/Frames menu → Record Logo menu → Set up your logo → Store menu → logo#
To set up your logo you have several features available:
-
Position / Size Adjustment
-
Keying type
-
Luma / Chroma key
-
Cut out color.
Select the logo number you want to save and wait until the unit finish saving. Your logo is now saved and you
can use it through the background logo button.
You can save up to 7 logos with the SQD200.
The capture of logos can be done only with the following conditions:
-
The capture can be done on the Main output or the Preview output (selected source),
-
The disappearance of logos on the Preview and Main output is normal during the save.
The logos are captured with the same size as is visible on the Main output without any form of adjustments.
If zooming is required resize the PIP or use the layer or input zoom.
A logo captures the state of the defined area on the specified output at the Main output resolution, and must
be recalled using the same output resolution. Resizing or other image manipulation of the captured logo is
not possible.
The capture zone is outlined by a white rectangle and includes the pixels beneath the white border. The non-
captured area is reduced in brightness.
Logo capture is limited in the number of pixels being captured. When the logo capture area is resized,
extending the horizontal size may reduce the vertical size to compensate.
Frames as Layer
The background frame is considered as a layer and has some settings available:
Transparency, Opening/Closing effect, Smooth move and Status.
Those settings have to be used as Layer settings.
Press [BACKGROUND FRAME] button to have access to the Layer menu settings.
You can change frame or delete frame on the preview screen using the same way the layers do:
Delete: Press [BACKGROUND FRAME
] button → Press [
BLACK]
Change: Press [BACKGROUND FRAME
] button → Press another Frame #
Press
[
TAKE]
to view the result on the main screen.
Frame setup menu
In the frame setup menu, you have the possibility to save a frame, and the possibility to erase a stored frame:
Logos/Frames menu → save Frame → Frame #
Logos/Frames menu → Erase → Frame #
34
