Analog way Pulse, User Manual

Page: 45 / 54

43
PIP configuration
1/ Click on the Image tab of the RCS interface. The empty
Image screen will appear on screen.
2/ By clicking on the drop-down menu in the Preview section,
situated next to the layer you wish to use as a PIP, you will
access the image parameters of the PIP source you select (1-
10).
3/ Set the desired PIP attributes (size, position, zoom, border,
transparency...).
4/ Click the Image tab to return to the main screen.
The Pulse LE offers a wide variety of transitions between the
scenes you create for your shows and events. It allows for
live recall of 4 user presets, each of which you can edit at any
given time.
1/ In the Layer Selection section, click the PIP button. On your
Preview screen, PIP1 will appear as a color rectangle. The
parameters of the layer will automatically appear in the RCS
Preview section.
2/ At the bottom of the Preview section, click on the Transition
tab, then select the transition type from the left dropdown
menu, and the effect behaviour from the right dropdown menu.
3/ Determine effect duration by sliding the duration bar left
(shorter) or right (longer), or by manualy setting the value in
the duration value box.
3/ Repeat the procedure in the Closing Effect tab to determine
the way your layer will close.
Layer transitions & effects
Creating presets
The Pulse LE allows the creation of user defined presets
very easily. Any setup you have configured on screen, can be
stored into one of the 4 available user presets.
1/ After having configured layers, PIP transitions, logos... on
your screen (see “Working With the RCS” chapter, p. 42), click
on one of the four available
Preset
buttons.