Analog way Pulse, User Manual

Page: 44 / 54

34 42
WORKING WITH THE RCS
Source input configuration
Once your Pulse LE is wired up to your PC, the first step in
properly configuring your machine is to individually select and
parameter your inputs.
1/ Click on the “Inputs” tab of the RCS.
2/ In the Plug column of the “Input” page, select the plug type
by clicking the appropriate field.
3/ Activate the input in the Enabled column if it is not.
4/ In the scroll-down menu of the Type column, select the signal
type connected to that plug.
5/ Repeat steps 2 to 4 for all sources connected to the rear
panel of your Pulse LE.
6/ Click on the “Inputs” tab to return to the main screen.
Source output configuration
1/ Click on the “Outputs” tab of the RCS.
2/ Select the type of plug which is connected to outputs 1 & 2
of your Pulse LE by clicking in the appropriate field in Analog
Type or DVI Type for both Main and Preview outputs.
3/ Select the appropriate output format and output rate.
4/ Click on the “Outputs” tab to return to the main screen.
The Output menu also allows you to generate test patterns.
The test patterns available through the Output menu let you
quickly and reliably setup your projectors.
* NOTE * : Be sure to turn the test pattern off to display your
sources again.
Working with PIPs
The Pulse LE with the Frame/PIP option installed, allows users
to manipulate a PIP (Picture In Picture) which you can move,
size, crop or zoom, apply transparency or transitions to.