Analog way Pulse, User Manual

Page: 27 / 54

Standby button
The STANDBY button allows users to put the Pulse LE into
sleep mode, and startup again. The STANDBY button does
not replace the ON/OFF switch at the rear of the unit, and
is implemented essentially for ease of use in rackmount
situations.
25
Menu section
The Menu Screen of the Pulse LE is the visual interface to
your Pulse LE menu. It gives users a constant indication of
available menu options, parameters of any selected object,
system information, and everything you need to know to
control the device.
The Menu scroll knob allows users to quickly scroll through
menu items and increase or decrease any modifiable value in
the Pulse LE menu. Simply scroll to the desired menu item,
and press the ENTER button to confirm your choice.
The EXIT/MENU button and the ENTER button in the Control
section of the Pulse LE, allow users to respectively enter and
exit the Pulse LE menu, and confirm selected menu items.
Input selection section
The Input Selection section allows to select which input (1-10) to
display in a selected layer. Select one of 10 simultaneous inputs, (6
analog inputs, 2 DVI-D inputs, 2 SDI inputs) by simply pressing one
of the Input buttons.
When pressed, the BLACK button allows users to remove layer
content on screen.
Freeze button
The Freeze button of the Pulse LE allows users to freeze the Main
output current display or the active layer, depending on the freeze
mode : Freeze All, freezes all visible layers, Layer Freeze, to freeze
the current selected layer.