Analog way Pulse, User Manual

Page: 43 / 54

41
Serial connection
1/ Connect an RS232 cable between the Pulse LE and your
PC, then power on your devices.
2/ Click on the RCS program file on your PC to run the software.
3/ Click on the “Connections” tab and select RS232 as the
connection type. In the drop-down menu, select the COM port
number corresponding to the connected device (default is Port
1).
4/ Click apply, and wait for devices to synchronize. The RCS will
display the following connection message : “Device Connected”
5/ Click on the “Connections” tab to return to the main screen.
Ethernet connection
1/ Connect a crossed RJ45 cable between the Pulse LE and
your PC, then power on your devices. Use straight RJ45 if
connecting through a network switcher.
2/ Click on the RCS program file on your PC to run the software.
3/ Click on the “Connections” tab and select LAN as the
connection type.
4/ In the “Remote Address” field, enter the IP address of the
Pulse LE you wish to control (see also “Working with the Pulse
LE”, p.36).
5/ In the “Remote Port” field, enter the remote port number of
the Pulse LE you wish to control (see also “Working with the
Pulse LE”, p. 36).
6/ Click Apply, and wait for devices to synchronize. The RCS
will display a connection message.
7/ Click on the “Connections” tab to return to the main screen.