Analog way Pulse, User Manual

Page: 37 / 54

35
The Output menu also allows you to generate test patterns.
The test patterns available through the Output menu let you
quickly and reliably setup your projectors.
1/ In the menu section, press the EXIT/MENU button and
select
Output
in the menu by rotating the corresponding knob.
Then press the ENTER button to enter the Output sub-menu.
2/ In the Output sub-menu, select the Test Pattern menu, then
select the output (Main or Preview) on which you want the
test pattern to appear by rotating the scroll knob. Press the
ENTER button to enter the Test Pattern menu. Choose the test
pattern you wish to use in the Test Pattern menu by rotating
the scroll knob, and press ENTER. The chosen test pattern will
immediately appear on the selected screen(s).
3/ Press the EXIT/MENU button twice to return to the main
menu.
* NOTE * : Be sure to turn the test pattern off to display your
sources again.
Working with PIPs
The Pulse LE with the PIP/Frame option installed, allows
users to manipulate a PIP (Picture In Picture) which you can
move, size, crop or zoom, apply transparency or transitions to.
PIP configuration
1/ Press the PIP button. The button will start blinking. On the
preview screen, the layer will appear as a color rectangle, and
“00” will be indicated in the layer rectangle. Layer parameters
will appear on your menu screen once a source has been
affected to that layer.
2/ In the Input Selection section, press the source button (1-10)
of the source you wish to affect to the selected PIP. The source
button will start blinking. On your preview screen, the source
will appear in the layer rectangle, and PIP1 will be indicated in
the layer rectangle.
3/ Press the PIP button, then rotate the scroll knob to
access desired layer attributes (size, position, zoom, border,
transparency...) and press the ENTER button in the Layer sub-
menu to enter and parameter layer attributes.