34
1/ In the MENU section, press the EXIT/MENU button and
select
Input
in the menu by rotating the scroll knob. Then press
the ENTER button to enter the
Input
sub-menu.
2/ In the
Input
menu, select the type of input you have plugged
into the
Pulse LE
by rotating the scroll knob (see Input
Specifications, p.14). Then press the ENTER button to enter
the types of inputs connected to the
Pulse LE.
3/ Press the EXIT/MENU button to return to the main menu.
4/ Repeat steps 1-3 for every source connected to your
Pulse
LE.
Input selection settings
Source output selection
Once your inputs have all been configured, the output settings
of the
Pulse LE
must be set according to the machines plugged
on your
Pulse LE
main and preview outputs (video projector,
preview monitor...).
* NOTE * : It is strongly recommended to set the output format
of the
Pulse LE
to match the native resolution of the display
devices connected to the
Pulse LE.
Output selection settings
1/ In the Menu section, press the EXIT/MENU button and
select
Output
in the menu by rotating the scroll knob. Then
press the ENTER button to enter the
Output
sub-menu.
2/ In the
Output
menu, select the output type, resolution
and frequency, to match the viewing hardware plugged into
the
Pulse LE
, by rotating the scroll knob (see also Output
Specifications p.16). Then press the ENTER button to enter
each of the output parameters.
* NOTE * : be sure to press the ENTER button to confirm every
selected setting, the
Pulse LE
, will revert to its original settings
if new choices are not confirmed.
3/ Press the EXIT/MENU button to return to the main menu.
Summary of Contents for Pulse
