Evaluation Board User Guide
UG-061
Rev. 0 | Page 23 of
From the
MAIN MENU
, the real time clock (RTC) can be
configured and evaluated. The RTC window is displayed in
Figure 43.
08600-
045
Figure 43. Real Time Clock Window
From this window, the RTC can be synchronized to the PC
clock by clicking the
SYNC TO PC CLK
button. The RTC can
be continually monitored by clicking the
READ CONT
button,
although it should be noted that the update rate may be limited
by the PC and LabVIEW speed.
Clicking
Power Management
under
MAIN MENU
allows you
to view the block diagram of the power sources to the ADE71xx/
ADE75xx in the power management window. This window is
shown in Figure 44.
08600-
046
Figure 44. Power Management Window
The user can view or change the current power configuration
with this option.
The LCD window has a series of tabs that can be selected to
configure and view the LCD panel display and the internal
RAM. Figure 45 shows the
3 PHASE
tab that depicts the LCD
panel that is used on the ADE71xx/ADE75xx reference board.
When the segments have been set up and written to the LCD
memory by clicking the
WRITE
button, the LCD panel on the
ADE71xx/ADE75xx reference board should be identical to the
3 PHASE
tab on the evaluation software.
08600-
047
Figure 45. LCD Window
