Analog Devices EVAL-AD7403FMCZ User Manual Download Page 4

Page: 4 / 20

UG-683

EVAL-AD7403FMCZ User Guide

Rev. 0 | Page 4 of 20

SOFTWARE INSTALLATION PROCEDURES

The

EVAL-AD7403FMCZ

evaluation kit includes a CD

containing evaluation software to be installed on your PC
before you begin using the evaluation board.
There are two parts to the installation:

•

EVAL-AD7403FMCZ

evaluation software installation

•

EVAL-SDP-CH1Z

driver installation

Warning

The evaluation board software and drivers must be installed
before connecting the evaluation board and

EVAL-SDP-CH1Z

board to the USB port of the PC to ensure that the evaluation
system is correctly recognized when it is connected to the PC.

Installing the

EVAL-AD7403FMCZ

Evaluation Board

Software

To install the

EVAL-AD7403FMCZ

evaluation board software,

Insert the included evaluation software installation CD into
the CD drive of a Windows-based PC, and open the
contents of the CD.

Double-click the

setup.exe

file to begin the installation. By

default, the software is saved to the following location:

C:\Program Files\Analog Devices\AD7403\

A dialog box appears asking for permission to allow the
program to make changes to your computer. Click

Yes

begin the installation process.

Figure 3. Evaluation Software Installation—User Account Control

Select the location to install the software, and then click

Next

Figure 4. Evaluation Software Installation—Destination Directory

A license agreement appears. Read the agreement, and then
select

I accept the License Agreement

and click

Next

Figure 5. Evaluation Software Installation—Accepting the License Agreement

A summary of the installation is displayed. Click

Next

continue.

Figure 6. Evaluation Software Installation—Start Installation

12239-

003

12239-

004

12239-

105

12239-

005

Summary of Contents for EVAL-AD7403FMCZ





















Search results

Summary of Contents for EVAL-AD7403FMCZ

Reviews:

Related manuals for EVAL-AD7403FMCZ

Brands by name

Popular brands

Analog Devices EVAL-AD7403FMCZ, User Manual

Search results

Summary of Contents for EVAL-AD7403FMCZ

Reviews:

Related manuals for EVAL-AD7403FMCZ

Brands by name

Popular brands