4 DEMONSTRATION
PROGRAMS
4.1 Overview
This chapter describes loading and running the demonstration programs supplied with the ADSP-21065L
EZ-KIT Lite board. The demos are designed to run on the Vi+ Debugger which is supplied on
the CD that shipped with this product. For detailed information on debugger features and operation, see
the
Vi+ Debugger Guide & Reference
and the
Debugger Tutorial (for ADSP-2106x Family
DSPs)
.
4.2 Starting the Vi+ Debugger
After the Vi+ software and license have been installed, click the Windows Start menu.
1.
Select
Programs -> Vi+ -> Debugger
from the Start menu. The debugger interface
appears.
2. From the Session menu, select
New Session
. The
Target Selection
dialog appears.
3. Configure the debug session as shown in Figure 4-1 and click OK.
Figure 4-1
Target Selection Dialog
A Target Message dialogue box will appears.
33
www.BDTIC.com/ADI
