R e v 1 . 1
| Page
1
Evaluation Boards for ADF7023
ISM Band Transceiver
EVAL-ADF7023DBxZ
Features
Frequency bands
862 MHz to 928 MHz
431 MHz to 464 MHz
Programmable datarates and modulation
1 kbps to 300 kbps
FSK/GFSK/OOK/MSK/GMSK modulation
Very low power consumption
12.8 mA in PHY_RX mode (maximum front-end gain)
24.1 mA in PHY_TX mode (10 dBm output, single-ended PA)
0.75 µA in PHY_SLEEP mode (32 kHz RC oscillator active)
1.28 µA in PHY_SLEEP mode (32 kHz XTAL oscillator active)
0.33 µA in PHY_SLEEP mode (Deep Sleep Mode 1)
High Sensitivity
Programmable output power
−20 dBm to +13.5 dBm (single-ended PA)
−20 dBm to +10 dBm (differential PA)
Excellent receiver selectivity and blocker resilience
General Description
The ADF7023 is a very low power, high performance, highly
integrated 2FSK/GFSK/OOK/MSK/GMSK transceiver designed
for operation in the 862 MHz to 928 MHz and 431 MHz to
464 MHz frequency bands, which cover the worldwide license-
free ISM bands at 433 MHz, 868 MHz, and 915 MHz. It is
suitable for circuit applications that operate under the
European ETSI EN300-220, the North American FCC (Part
15), the Chinese short-range wireless regulatory standards, or
other similar regional standards.
The ADF7023 evaluation platform consists of a 4-layer PCB
daughter card which plugs into the Eval-ADF7xxxMB3Z
motherboard.
Table 1 Evaluation Boards
Board Number
RF Frequency Description
EVAL-ADF7XXXMBZ3
-
Mother board required for evaluation of the ADF7023 daughter
boards
Eval-ADF7023DB1Z
868/915 MHz
Two separate matching networks: One for the single ended PA and
one for the LNA
Eval-ADF7023DB2Z
868/915 MHz
One combined matching network incorporating the single ended PA
and LNA
Eval-ADF7023DB3Z
433 MHz
Two separate matching networks: One for the single ended PA and
one for the LNA
Eval-ADF7023DB4Z
433 MHz
One combined matching network incorporating the single ended PA
and LNA
Downloaded from
